PULSE HX 2000 Metal Detector
Export Price 2,895.00 Euro
Treasures
natural gold
Gold nuggets
metal objects
PULSE HX2000 Professional Pulse Induction Metal Detector with metal discrimination. Precision – Made in Germany
The pulse induction technology of PULSE HX2000 has decisive advantages compared to conventional VLF (very low frequency) detectors:
pulse induction system with microprocessor-controlled metal type indication
undisturbed search on mineralized soils and in salt water
4 various searchcoils with automatic calibration
high sensitivity to gold and precious metals
convenient search and easy operation (prior knowledge or training courses are’nt necessary)
Spacious search areas:
Only the 120 x120 cm search frame (pulse induction technology) enables a comfortable and fast exploration of large areas. Example: the scanning of an area with the size of a soccer field will only take 3-4 hours, while the search with a conventional device with a panning coil would take several weeks.
The PULSE HX2000 was also developed for the search after large metal objects deep below the surface and is especially suitable for professional seekers who want to search in wide-ranging areas in a speedy and efficient manner (small parts, e.g. rusty nails or bottle caps are not indicated).
Up to 6 m (20 feet) depth performance with 2×2 m cable coil:
Only with our big searchcoil (2×2 m cable coil) and pulse induction technology it is possible to locate larger objects in a depth of up to 6 m. In comparison, conventional detectors with panning coils only allow a search depth of at the most 2 m.
Undisturbed search:
Many mineralized soils contain stones with metallic characteristics which therefore are displayed as metal objects by the majority of detectors. Thus, a selective search is difficult.
Soils of this kind (the same goes for salt water) are no problem for PULSE HX2000 – with the Reset-button (automatic zero balance) most of the disturbing mineralized objects (which can lead to indication errors) are neutralized
Metal discrimination
For metal discrimination the PULSE HX 2000 is provided with a micro processor-controlled conductibility recording. Thereby metals like iron, copper, aluminum, gold or silver are discriminated and separately displayed.
Electronic unit
The electronic unit is installed in a hard-wearing box. The main knob is attached to the front as well as the reset button, the frequency and volume regulation. The digital display indicates the various conductivity values
Search modes:
ID (Discrimination Mode)
In this search mode the discriminator comes into operation. Thereby an optical and acoustical discrimination takes place. The different metals will be signaled through varying tones and conductivity values.
For the PULSE HX2000 we offer various waterproof searchcoils, which can be connected to the electronic unit without additional adjustment.
Automatic adjustment: To reach the optimal search depth, the adequate searchcoil should match the size of the object. PULSE HX2000 works with a variable search frequency between 1200-1600 Hz, therefore the application of all searchcoils is uncomplicated. The various searchcoils for the PULSE HX2000 are connected to the electronic unit in which a special circuit mechanism controls the coil electricity and adjusts the adequate search frequency automatically. By using the appropriate searchcoils 50cm smaller and medium-sized objects can be located. To reach an ideal search result – depending on size of object – the adequate
50 cm Ø searchcoil
Useful for the search after small, medium-sized and large metal objects. Also very convenient for a rapid exploration of an area.
1.20 x 1.20 cm Searchframe
Preferably used for the depth sounding after medium-sized and large metal objects. Large areas are scanned fast and efficient
Fast battery charger
The rechargeable battery is charged within 90 minutes from power outlet or car (cigarette lighter) and guarantees an operating time of 4-5 hours.
